Friday, October 2, 2009

Ford Mustang Dual Piston PBR Upgrade For Ford Thunderbird


Over the last few months, the Thunderbird has been getting a lot of repair work done. We started out by replacing all brake components other then the lines. We used 1999 Mustang dual piston aluminum calipers made by PBR, Monroe Mustang ceramic pads, new drums for the rear and Morse Ceramic brake shoes. Before the upgrade, I had air in my brake system, so I can not asses the improvement. I can say that I am satisfied with the result of this upgrade.

My front suspension was totally replaced with all new hardware. I used Moog strut bushings, Moog Ball Joints, Moog control arms and Monroe Sensitrac Quick Struts due to the excessive cutting to get the old parts out. The whole setup was never changed before (from 1995?!?!), so you can imagine that getting bolts out was a real treat. I am very happy with the Moog componets, I just wish I bought their endlinks. The middle of the road endlinks I bought worked but they were kind of odd.

For the rear, we used Monroe Sensitrac shocks but left the rear stock springs for now. The rear springs will be done in the future. We also replaced the rear stablizer bracket.
Rounding out the upgrades, new Ford OEM floor mats was added to the interior.
All of the pictures are at http://www.v8thunderbird.com ! Check it out!




3 comments:

  1. It looks good. I think I'm gonna do some work of my own, too. This is inspirational.

    ReplyDelete
  2. Heya gotta admire the knowledge and know how, I just bought the Tbird 93 LX any advice on knowing what upgrade part is worth salvage from pick n pull tbirds

    ReplyDelete